2024 Best Electric Pumps For Inflatable Paddle Boards

Best Electric Pumps for inflatable paddle boards

I keep updating this article as new pumps arrive on the market. This is the latest update for 2023 for electric pumps that work the best for inflatable stand up paddle boards.

Are you tired of manually pumping up your board to 15 PSI?  Join the club!  If you’re tired of sweating before even getting on the water read on! 🙂

Over the years I have tried quite a few different electric pumps and some are definitely better than others. They can vary in speed, power, noise level, size and price.

For a long time there weren’t many options out there, at least not many great options.  However as SUP grows in popularity so does the demand for good electric pumps.

The most common types of electric pumps used with inflatable SUP’s are:

  • pumps that connect to your car battery
  • pumps that connect to an external battery pack
  • pumps that connect through an integrated rechargeable battery
  • pumps that connect to the 12V connection in your vehicle
  • air compressors

I’m just going to put out there right now that an air compressor is your worst option. They don’t work well for paddle boards.

Unless you have a specific adaptor to connect them properly they won’t secure to the valve on the board. However even with the right adaptor they are insanely slow to inflate an ISUP.

I have tried over and over to make them work and they just don’t. I personally wouldn’t recommend going that route.

Stick with the pumps that are designed specifically for inflatable SUP’s and high-pressure inflatable boats such as the ones listed below.

BEST ELECTRIC PUMPS FOR ISUP’S FOR 2023

I have done extensive research on these pumps and used them myself many many times over.

I love all three of these electric pumps and they not only work great for the majority of inflatable SUP’s but they can also be used for inflating inflatable kayaks, inflatable boats, inflatable mattresses, inflatable tents, inflatable pools and other inflatable toys.

These are the electric pumps that work best for inflatable paddle boards right now.

LET’S TAKE A CLOSER LOOK

Let’s take a closer look at these pumps so you can find the right one to suit your needs best.

1. OUTDOORMASTER SHARK II 12V ELECTRIC PUMP

Shark II Electric Pump for inflatable SUP's

I have been using the Shark II electric pump for a couple of years and it hasn’t let me down. Outdoormaster has done a great job in designing a pump that is powerful yet functional.

It has some really big pluses that make it a great one to consider.

IMPORTANT FEATURES

This 12V electric pump has some great features as well.

5 VALVE ATTACHMENTS

The attachment you need for most inflatable SUP’s is the H3 valve attachment. I have used the Shark II with about a dozen different SUP brands and it has worked perfectly with all of them.

However it also comes with more attachments such as for a:

  • Boston valve
  • C7 valve
  • Pinch valve
  • 805 Valve

With all of these attachments it also works great for inflating inflatable kayaks or canoes, dinghies, air mattresses and other inflatable products.

It also comes with four different sized gaskets (the white rubber rings) to ensure a tight seal when inflating your board.

PLUGS INTO THE 12V DC CAR CONNECTOR

The Shark pump very easily plugs into the 12V accessory socket in your vehicle.

The power cord is 9′ long making it easy to reach the plug and the board.

KINK FREE HOSE

The 4′ kink-free hose is really easy to secure to the pump and doesn’t get kinked as some other flimsy hoses can.

DIGITAL DISPLAY WITH AUTO SHUTOFF

It has a digital display that is easy to read. There is no guessing at what PSI level you are at as you can see the progress on the display.

Once you set the PSI level it will automatically shut off when it reaches the set air pressure.

LIGHTWEIGHT

This pump is also one of the lightest options weighing only 3.6 lbs. and it is very easy to carry with the built-in carry handle.

It doesn’t come with a carry bag, which is unfortunate but I just keep mine in a canvas bag and keep it in my larger SUP gear mesh duffle bag.

DOES NOT OVERHEAT

Most of the electric pumps for SUP’s on the market have a reputation for eventually overheating especially if you are inflating more than one board at a time.

This is not the case with the Shark II pump.  It has a built in automatic cooling system that cools the pump down as it is working hard even when inflating multiple boards.

I regularly use mine to inflate 2-3 boards in one go and it’s still going strong.  This has been a huge improvement over previous pumps that I have used in the past.

CAN INFLATE UP TO 20 PSI

This pump can also inflate any board up to 20 PSI, which is 5.5 PSI more than many other pumps that I have used in the past.   Typically I only inflate my boards to 15 PSI however it’s nice to have the option to go higher if needed.

INFLATE & DEFLATE

I love that not only does this pump inflate your board but it can also deflate it as well.

I never used to use the deflate option but lately I have because it really helps to get all of the air out of my boards making it easier to roll them up and store them away in their backpacks properly.

NOISE

Noise level isn’t bad, similar to the other electric pumps on this list.  None of them are whisper quiet. 😉

SPEED

Although the inflation speed will depend on the size of your paddle board, I find on average it takes me 7-8 minutes to inflate my board with the Shark II pump, which is quite good compared to many others on the market.

WARRANTY

It comes with a 1-year warranty.  I would love to see a longer warranty period however 1-year is pretty standard for all electric SUP pumps.

Plus I haven’t had any issues and I’ve heard over and over from people who are very happy with it so that’s very positive.

5 STARS

I use this pump a lot and have had no trouble with it.  It’s one of the fastest options out there and it’s never let me down.

With over two years of use at this point and hundreds of times inflating my paddle boards, it’s earned its 5 star status.

REVIEW

For more information, pictures and video please click the link below for my full detailed review.

Click Here For My Full Review Of The Shark II Electric Pump.

WHERE TO FIND THE BEST DEAL

LIVE IN THE US? For the best deal in the US plus free shipping for the Shark II electric pump go to Outdoormaster.com. 

LIVE IN CANADA?  For the best deal go to Herosup.ca for the Shark II Electric Pump.  Prices are in Canadian dollars and they offer free shipping anywhere within Canada.

______________________________________________________________________________________

2. NIXY VENTUS UNIVERSAL ELECTRIC PUMP

NIXY Ventus electric pump package

The Ventus electric pump was designed by Nixy Sports, a known and respected inflatable SUP company.  These guys did their research and put a lot of thought into what would make for a great electric SUP pump.

The Ventus has an integrated cooling system that keeps it cool while inflating multiple boards.  It works brilliantly.

I tested this pump on 5 boards in one go and had no issues with overheating, stuttering or stopping. So if you are taking out multiple boards this is a great choice to consider.

Although this pump works perfectly with the NIXY inflatable SUP’s, I have tested it on multiple other brands as well and it works very well.

IMPORTANT FEATURES

NIXY has considered all the important features one could want in an awesome electric SUP pump.

7 VALVE ATTACHMENTS

This pump comes with the most nozzle attachments out of any other electric SUP pump.

It has 7 different attachments and 3 little rubber gaskets so it can easily be used with all different types of inflatables including inflatable SUP’s, inflatable kayaks, dinghies and other inflatable products.

12V DC CONNECTION & 12V BATTERY CABLE

It comes with both a 12V DC power cord that connects to the 12V connector in your vehicle as well as battery cables with alligator clips.  So you have the option to power it either way.

The power cord is 10′ long and wraps around the cord management system tucked underneath the pump keeping it out of the way when not in use.

OPTIONAL BATTERY PACK

There is also an optional battery pack that is ideal to use if you plan to inflate your board away from your car.  I like to use this battery pack if I am hiking into a mountain lake or if I have to park a long ways from the water.

AUTO SHUT OFF

You can set the PSI level and walk away, it will shut off automatically once it reaches the set air pressure so there is no worry of over inflation.

INFLATE & DEFLATE

The Ventus also has the option to inflate and deflate your board, which is fantastic.

INFLATES UP TO 20 PSI

Although 15 PSI is normally as high as you need to go with an ISUP, if you needed to go a little higher the pump can go right up to 20 PSI.

NOISE

Noise level is very similar to other 12V electric pumps.  It starts off fairly quiet but gets noisier once it reaches the second stage of inflation, which is very common.  These little pumps are powerful so it’s hard to avoid any noise at all.

SPEED

After testing this pump with 5 different NIXY paddle boards it took on average 8-9 minutes to inflate each ISUP.

I normally spend that time getting the rest of my gear ready so I am ready to go once my board is finished inflating.

CARRY BAG

Ventus electric pump carry bag

A bonus with this pump and something I really appreciate is that it comes with a great padded carry bag.  The bag has a front zippered pocket as well as an inside zippered mesh pocket to keep the hose, cables and nozzles organized.

It comes with a shoulder strap and padded top handle making it easy to bring this pump anywhere.

WARRANTY

This pump includes a 1 year warranty and NIXY has great customer service if you have any issues or questions.

5 STARS


This pump is a solid 5 stars all the way.  It is reliable, works great even when inflating multiple boards and has a functional and convenient design.  It does not disappoint.

REVIEW

Click Here For My Full Review Of The NIXY Ventus Universal Electric Pump.

WHERE TO FIND THE BEST DEAL

Go straight to the NIXYsports.com website for the absolute best deal.

______________________________________________________________________________________

3. OUTDOORMASTER WHALE RECHARGEABLE ELECTRIC PUMP

Whale Rechargeable Electric Pump for SUP

The Whale is the newest electric pump that I’ve reviewed and it’s a really good one.

What I love about the Whale is that it has a built-in rechargeable battery so you can charge it up and use it absolutely anywhere.

There’s no external battery pack to pay extra for or to lug around, everything is built in and comes included in the price.

It also comes with a 12V DC connector so you can plug it into your your vehicle if you run out of charge or if you simply want to power it that way.

This pump can easily inflate two paddle boards with one full charge and I have had absolutely no issues with the Whale this entire year of using it.

Below are some of the key features to be aware of.

12V DC CAR CONNECTOR & AC ADAPTER

As mentioned above this pump comes with both a 12V DC connection as well as a power cord for the built-in rechargeable battery making this pump very versatile.

MAX 16 PSI

Whereas the other two pumps on this list are capable of inflating up to 20 PSI, the Whale can only inflate up to 16 PSI.

Is that a big deal?  No it definitely isn’t.  Most inflatable paddle boards are recommended to be inflated up to 15 PSI.

There is rarely ever a need to inflate your board any higher so for me the 16 PSI max wasn’t a big deal at all.

NOISE

The noise is the same as all the rest.   You might not find it ideal if you are camping and want to get out early without disturbing everyone else but for most situations it’s truly not a big deal.  You get used to it.

The Whale starts off a little quieter until it reaches 1 PSI.  Then it kicks into the second stage of inflation and the noise level increases until it reaches the set PSI pressure.

AUTO SHUTOFF

You can easily set the target PSI level on the digital screen.  The pump will automatically shutoff when it reaches the right air pressure.

DIGITAL DISPLAY

With the digital screen you can watch the progress as well as check the battery power.

INFLATE & DEFLATE

There is both an inflate and deflate connection on the pump so you can use it not only to inflate your board but also to deflate it as well.

USB CONNECTION

The Whale pump also a USB connection so you can charge your devices as well.  The Shark pump does not have this feature.

LED LIGHT

The rear LED light is handy if you are ever using this pump in the dark.  You can turn the light on or off as you please.

WEIGHT

This pump is slightly larger than its little brother the Shark II and weighs a couple pounds more at 5.8 lbs.  Considering it has a built-in battery I think the size and weight are still quite good and easy to carry around.

INCLUDED IN THE BOX

The Whale electric pump comes with:

  • 4.5 foot hose
  • 5 piece nozzle set including H3/HR valve, Boston valve, C7 valve, Pinch valve and 805 valve
  • 3 rubber gaskets

DURABILITY

I’ve had no issues with durability.  It seems solid to me and I haven’t had any broken parts or pieces despite many paddling trips this year.

The pump has worked exactly as advertised and the cooling system seems to work as it should.

5 STARS

This pump works well and comes at a good price.  However I have given it only 4 stars due to the fact that you can’t see the inflation progress as there is no digital display and the fact that it tends to burnout if inflating multiple boards often.

I find this pump works best for single use (inflating one board per outing) and then it usually lasts a long time.

WARRANTY

This pump includes a 1-year warranty.

REVIEW

Click Here For My Full Review Of The Outdoormaster Whale Electric Pump.

WHERE TO FIND THE BEST DEAL

LIVE IN THE US? For the best deal in the US plus free shipping for the Whale electric pump go to Outdoormaster.com 

LIVE IN CANADA?  For the best deal go to Herosup.ca for the Whale Electric Pump.  Prices are in Canadian dollars and they offer free shipping anywhere within Canada.

______________________________________________________________________________________

DO I NEED AN ELECTRIC PUMP?

Electric pump for stand up paddle board

If you are already searching for one then chances are you have decided life would be easier with an electric pump doing the work of inflating your board for you.

I tend to agree.  Although the dual action hand pumps that come with most inflatable paddle boards work quite well, they do take a bit of effort to reach 12-15 PSI.

With steady pumping I can normally inflate my board in 6 to 7 minutes with a hand pump.

However if I have to pump up a second board I’m much slower as my muscles get tired.

INFLATION SPEED

A good electric pump will allow you to conserve your energy for the real fun on the water.

Not all electric pumps are that great.  In fact I have tried some that are painfully slow.  I have found the range in time to vary between 5 minutes and 14 minutes depending on the pump – Big difference!

The three pumps listed above are the fastest I have tried.  They take anywhere from 6 to just over 9 minutes to inflate each board.

I will often use the hand pumps when reviewing a new board so I can test out the pump and see how well it works.  Therefore I manually inflate a LOT of boards.

However for my personal outings I always use an electric pump, especially when not alone and there are two or more boards to inflate.

I am definitely not lazy by nature but once I started using an electric pump it was hard to go back to manually pumping (especially in the heat of the summer!).

In my opinion an electric pump is well worth the purchase.

PRICING & DEALS

I have found that the SUP electric pumps sell out every year and sometimes you have to wait mid summer for them to be restocked. They are extremely popular.

I get a lot of emails from people asking where to find one when they seem to be out of stock everywhere. My advice is to grab one when you see it.

The prices tend to fluctuate so if you see one for a good price grab it when you can and watch for those sales!

SUMMARY

using the Shark II electric pump for paddle boards

If you need/want an electric pump for your inflatable stand up paddle board, these are the best options at this time.

I continue to use these pumps regularly with all my boards reviews and they are a HUGE help.

Thanks for reading!!  Any questions feel free to drop them below and I will do my best to answer.

Comments

  1. RE web article: 2023 Best Electric Pumps For Inflatable Paddle Boards
    Outdoormaster Shark II
    Power Source: 12V DC Connector Max PSI: 20 PSI Auto Off: Yes Best Deal:
    Outdoormaster.com Use discount code ISUPWORLD20OM for 20% off.
    NIXY Ventus
    Power Source: 12V DC Connector, Car Battery or Optional Battery Pack (Costs Extra) Max PSI: 20 PSI Auto Off: Yes Best Deal:
    NIXYsports.com
    Outdoormaster Whale
    Power Source: Integrated Rechargeable Battery or 12V DC Connector Max PSI: 16 PSI Auto Off: Yes Best Deal: Outdoormaster.com
    Use discount code ISUPWORLD20OM for 20% off.

    I’m 70 retired and bought 2 Sea Eagle 370 Inflatable Kayaks for my wife and I and the grandkids.
    What best options do you have for an electric/battery air pump that will inflate & deflate two SE 370 kayaks?
    Taking into consideration the fitting of the valve connection too.
    Thanks! Ric Barnes, Ft. Wayne IN.

  2. Patricia Ootjers says:

    Hi Alison, I am currently researching rechargeable electric SUP pumps and have found two sold here in Canada but other than from the companies that sell them I can’t seem to find out any other information and was wondering if you could help.
    The first one I found is by a company in BC called ‘Sea God’ https://seagods.ca/products/battery-electric-sup-pump
    And the second one is also by a company in BC called ‘Premier Paddle Boards https://premierpaddleboards.ca/collections/accessories/products/rechargeable-isup-pump
    Have you come across either of these two types of pumps?
    Any help is most appreciated.

    • Hi Patricia, Sorry for my late response. I haven’t tried either of those. The Premier Paddle Boards one is a common one that is sold by a few different companies so I believe I have tried something similar and didn’t love it however I’m not sure about the one from Sea Gods. Check out the Outdoormaster Shark II electric pump sold at Hero SUP in Vancouver, BC. That’s the one I have been using for the last couple years and it’s been awesome. I know they ship free anywhere in Canada as well. Cheers.

  3. Hi. I purchased the Shark a few weeks ago, and I haven’t been able to get it to inflate my SUP beyond about 5 PSI after about 20 minutes. Any idea what I might be doing wrong?

    • Hi Kristin, It’s possible the hose has come loose from the back connection on the pump. Mine came loose a couple times and it was losing air. Check that the hose connection is screwed on properly and see if that helps.

  4. Hi Allison,
    Can you tell me if the Outdoor master pump connects to NRS board. I can’t seem to find specific info on this. Thanks.

    • Allison says:

      Hi Holly, Yes I’m fairly sure it does. I haven’t tried it on an NRS board yet but it should work with the Leafield valve that NRS uses.

  5. Hi Allison,
    Playing the “Inflation Game” was fun for a little while, by best time was 8 mins from in the bag. Now I’m a year older, my arms are tired, and there are more boards to inflate. Have you timed inflation with the various pumps? How long does the Shark and the BP take to inflate your favorite board? I’m looking for something to inflate my Thurso Waterwalker 10’6 in under 10 mins. Is there such a thing?
    Thanks for all the reviews.

    • Allison says:

      I couldn’t agree with you more. I didn’t mind manually pumping for awhile but it gets tiresome especially if inflating more than one board. 🙂
      To inflate an 11’2″x31″ board the Shark pump takes 7 minutes and 22 seconds. The BTP Mano pump is very similar in time, the BP12 is slightly slower.
      For the Waterwalker 10’6″ it should even be slightly faster to inflate. I’m actually taking my 10’6″ WW out on Wednesday, I’ll double check the time for you.
      Honestly the Shark pump is the way to go. It’s the best electric pump I’ve tried.

  6. Thanks for the information, I just pre-ordered the Shark from Herosup.ca. It’s on their website now, and are offering 10% off for pre-orders. It came to $160.65 CDN including tax and shipping, very reasonable! I can’t wait to ditch the hand pump and save my energy for paddling.

  7. Hi Allison,
    first of all thanks for all your work on this website it certainly has helped me on my isup journey. I know this doesn’t fit the original post about electric pumps (which is definitely the only bad thing about isups), but have you ever tried one of those easy eddy boards (easyeddypaddleboards.com)?

    • Allison says:

      Thanks Jeorge, that’s really nice to hear! I’ve heard of the easy eddy boards but haven’t had a chance to try them. They look really cool, although pricey. Plus they seem to be quite heavy. If you end up trying one I’d love to hear your thoughts on it!

  8. Hi Guys-
    Do you have any advice for what type of 12v battery to buy for these pumps? I got the iRocker pump but it blew the fuse in my car so I’d like to get a rechargeable 12v for back up. They come with a lot of different specs and prices so I can’t tell which one I need.

    Thanks,
    Keeley

    • Allison says:

      If the pump has alligator clips I think any basic 12V rechargeable battery should do the trick.

      • It does have the alligator clips, but i’m still at a loss to know which 12V battery to get>!? 4.5aH – 8aH seem available.. prices ranging from $20-80?! any advice?

  9. Liat Perlman says:

    Hi Serge,
    I am looking for a chargeable battery-operated pump suitable for an IK.Are there any on the market? Or are there any fittings that can be added to a universale chargeable battery operated pump such as a bicycle pump from Ryobi or Dewalt.

    Thanks
    Liat

    • Allison says:

      Hi Liat, The only chargeable electric pump I know of that works for inflatable kayaks is this one. I don’t know of any other options unfortunately.

  10. Thank you for the reviews. I just order the Outdoormaster Shark 12V. Thank you for the coupon code too! It saved me a lot of money using that and going through your link compared to Amazon’s current price.

  11. Hi,
    Thank you for the SUP pumps review and recommendations!
    I was looking to get a Seamax pump as the only Amazon’s Choice on Canadian Amazon. But then I read some reviews, and many users complained about low durability, overheating, pressure losses, and breakdowns. One customer even took his broken pump apart just to find out that the piston seal had melted, and both the piston and the cylinder were made of plastic, and both scored/melted. I am just wondering if you checked the materials the cylinder/piston pair is made of in the pumps in your review. In general, could you please share your experience with pump breakdowns due to overheating?
    Thanks.

    • Allison says:

      Hi Serge, Unfortunately overheating and melted piston seals are not an uncommon problem with electric pumps for SUP’s. I had several Bravo electric pumps burnout in one year a while back, it drove me crazy. Mind you I used them A LOT but still it felt like a waste of money. I still use them sometimes and they seem to be a little more durable than they were a few years back, I haven’t had any burnout in a while.

      I don’t personally like the Seamax pump and I know it’s literally one of the only options in Canada at the moment. It’s quite slow and I also have heard of so many issues with it.

      If you can hang on for a month I heard that http://www.herosup.ca in Canada is going to be selling the OutdoorMaster Shark electric pump as of the beginning of August. This one has a built in cooling system and claims to be able to inflate up to 3 boards in a row with no overheating. I’ve been testing it and so far it’s fantastic and I really like it. Mine hasn’t gotten hot at all whereas the other electric pumps often get really hot to the touch. I’ve been waiting for a better option to what’s already out there and I’m hoping this one is the answer.

      • Hi Allison,
        Sorry for the delay with the reply.
        Thank you very much for the invaluable advice! After extensive research and your recommendations I was able to get an OutdoorMaster Shark II pump directly from the manufacturer. They shipped it directly from China to Canada via DHL, and the package arrived within 3 or 4 days. And, most importantly, the price was very reasonable. Before trying the manufacturer directly, I contacted herosup.ca, and they confirmed that they would be selling this model within a month. But I got it much quicker, and I am happy. 🙂 I have not tried the pump yet. Still waiting for my iSUP to arrive. Hopefully, I will be able to enjoy it within the next day or two.
        Thank you again!

        • Allison says:

          Hi Serge, That’s awesome! I’m impressed with how quickly they were able to ship it to you from China. So glad that worked out for you!! 🙂

        • Derek O'Connell says:

          Hey Serge,

          Are you able to share where you found that pump from China? I am also keen to not wait until August to get the OutdoorMaster Shark II in Canada.

          Cheers!

  12. I have an Isle Explorer and I am looking for an electronic pump that would fit to use on these boards as well as pump them up fast. Any suggestions?

    • Hi Ashley, The Outdoormaster Shark is a good one. I’m just reviewing it now and it works great. Plugs into the cigarette lighter in your car. It comes with all the right valve attachments so should work perfectly with the Isle Explorer. The BP12 electric pump has always been my go to in the past, it’s a better price but it tends to overheat after awhile if you are inflating multiple boards.

  13. Is there a pump you would recommend for inflating 2 boards in a row? Lots of reviews I’ve read mention overheating on the second board.

    • Hi Ian, I am just reviewing the Outdoormaster Shark right now, it works great. It’s the first one I’ve found that doesn’t seem to overheat when inflating multiple boards. It’s worth checking out.

  14. Mark Wirt says:

    I have a couple of older Xterra Sups (6 & 7 years old). I bought a Bravo 2-stage and the valve connector was incompatible so I had to return it. $17 of postage! I am looking Seamax SUP 20 and that seems to have a variety of valve connectors. Would this work for my boards. Don’t want to mess with shipping again. Thanks for your thoughtful reviews!

    • Hey Mark, The Seamax should work fine but one thing to note about that pump is that it is really slow. Another one to check out is the Outdoormaster Shark. Just reviewing this one, it works great and comes with all the right valve attachments.

  15. Ewelina says:

    Hi please can you help I am looking for electric pump for my Sup paddle board however the car park are on top of cliffs and will need to pump the board on the beach where I will not have acces to car any cheap electric pump which can operate without car lighter or car battery in reach?

    • Hi Ewelina, I totally get it. The only options I know of for electric pumps that can inflate the board away from the car is a pump with a battery back. The cheapest one I have been able to find is this one at SeaEagle.com.

  16. Looking for recommendations for a air compressor for my vilano journey stand up board. Do you know if the thurso surf sup would be a good fit?

    • Hey Lisa, The Thurso Surf pump should work great with the Vilano Journey. It has the Halkey Roberts valve attachment that should work on all ISUP’s.

  17. Bec Harrison says:

    Hi there, I have the Nixy 12v pump. It’s branded as surf69 in the UK.
    Had it for 4 months, worked great, until tonight!
    Got my SUP up to 13psi but then wouldn’t go y further.
    It sounded like the board was losing a small amount of air as you could hear it through the compressor.
    I can’t work out if it’s:
    1) the stem catching on the pump valve a tiny bit so letting air out as quick as in
    Or
    2) the pump isn’t working properly. I’ve never felt the air pressure on my hand before, but when I tried tonight, it didn’t feel very powerful.
    When I deflated with the electric pump it took much longer than normal.

    I’m completely baffled…..anyone else had a problem like this?
    Many thanks
    Becky

    • TYLER MATTIKOW says:

      Yes, I had the same problem . Took apart the pump, turned the piston broke off the shaft. Some JB weld and it is working again..

  18. John M DRAGANESCU says:

    Unfortunately for all us iSUP users, every electric pump reportedly designed to inflate iSUP’s suffers from poor quality, craftsmanship, reliability, dependability, and longevity. Visiting Amazon and dozens of other websites devoted to these pumps will demonstrate this. The country where they are manufactured provides all the explanation for this fact.

  19. I have the BP12 Mano single stage with the battery for my Red Paddle Sport but I am noticing that even when I have the valve on the board popped up so there’s no air coming out, the valve adapter that came with the BP12 Mano to connect to the board – the cut out is too short. So when you attach the pump’s adapter to the board and twist it to “lock” it in place.. it’s essentially too short so it pushes against the popped up knob and when I am done inflating and remove the valve, air spews out until I pop the knob back up. Has anyone found a solution?

    • Hi Tracy, I’ve had that happen with a couple boards over the years. I’m trying to remember how I fixed it. I believe I used a little tool to twist the valve tip on the board so that it didn’t pop up as high. I do remember it took some fiddling. However you don’t want to risk ruining your valve so maybe the best bet is to contact Red Paddle Co and see what they say. Good luck!

    • Hey Tracy. I’m having the same problem! It’s annoying because I inflate it to 15psi, but when I detach the tube, it loses several PSI. I’d love to know if you found a solution.

      • Hi Katie, Are you pushing in the valve tip so that it ‘pops up’ before you start inflating the board? The valve tip needs to be in the up position so that it won’t lose any air when you detach the tube. Then when you want to deflate it you just push the valve tip in and twist.

        • Yep. After inspecting further, it seems the electric pump hose attachment has a crossbar inside that the hand pump does not. So my thoughts are that the cross bar is pushing the valve tip down on the board and then when I twist it to lock the hose on, it’s forcing the valve into the open position. My board is currently inflated because it’s easier to just toss it on the top of the car if I’m going out once a week than it is to keep deflating and re-inflating, but when it does get deflated, I’m going to test my theory by cutting out the crossbar from inside the valve.

  20. Any suggestions for 15 PSI pumps that work well with the Cotsco Body Glove Oasis and Performer boards? Thank you!

    • Allison says:

      I have used the BTP Mano 2-Stage electric pump with the Body Glove Performer, should work fine with the Oasis as well. It’s one of the better priced ones on Amazon right now as well.

  21. Hi, Wondering if someone ran across a pump that operates on 5v, so USB batteries could be used. I understand that performance would be worse and you cannot reach high PSI numbers, but if it could fill the board to some percentage, then use a pump just to bump up the pressure, that would be cool.

  22. Ben Ridge says:

    Would love to see an update to this post with reviews of the Tower pump and the Seamax marine. They aren’t cheap, but are they worth it?

    • Hey Ben, Thanks for the comment! I recently tried the Tower pump, works good.. a little slower than the Bravo electric pumps but decent all the same. Haven’t tried the Seamax Marine one yet but will add it to my list of reviews!

      • TYLER MATTIKOW says:

        I’m not sure about the Seamax but the tower pump looks identical to the Nixy which is rebadged by many companies. I’ve had mine for a few years and am planning on upgrading it’s motors to try and make it faster.

    • Hi Ben, I bought two Seamax Marine pumps. One in June 2018 for myself and because I liked it so well I bought another for a friend. I bought hers in July 2019. Just my luck, she and I went paddling in January (we live in Florida) and neither pump would Inflate our boards. They ran constantly and got the boards to take shape but would never reach capacity. They claim there is a 2 year warranty but when I contacted them they told me
      For $60 they would send me a new model (???) I paid $84 originally and they now list for $65 on Amazon. I am very disappointed. I didn’t paddle for a lot of 2019 because of family heath issues so neither pump really lasted that long.
      I went yesterday and used a friend’s Tower and it was great. Bonus: it deflated also. 😊😊😊. I want to order one but it is $134 so I am hesitating and it says there is no warranty.

  23. Anna Baker says:

    I just purchased a Seamax Marine two-stage electric pump that goes up to 20 PSI. It is AMAZING so far! Can’t believe I waited so long to get an electric pump! Comes with multiple rubber o-rings to find the right fit for your board and plugs into the 12V DC connector in your car. Also has 2 yr warranty. Doesn’t come with carrying case though.

    • I’ll be interested to know how long it lasts for you. I have one and it broke quickly. Bought it in September and broke by June. I live in MI, so didn’t paddle in the winter! A friend bought hers in Aug and it quit working by June too.

  24. Anne DeConinck says:

    Sevylor 12V 15-PSI SUP and Water Sport Pump – I know a couple of my friends have this pump. Works great!
    here is the link to it on Amazon.

  25. When we’ve used the BP12 Electric Pump to pump up iSUP’s, the hose that connects to the pump blows off when the board is almost full. You can manually hold the hose on, but eventually it gets too hot to hold onto. Any advice on keeping the hose attached to the clip/pump?

    • Hi Tammy, This has happened to me many times and I know it’s quite annoying. I have never found a good solution. It doesn’t seem to happen with all boards but it is quite common with these Bravo electric pumps. Bring an old towel or a glove that you can use to hold the hose as it gets near the end when it is hot. The newer pumps come with a better valve attachment – the type that screws in similar to the attachment on your hand pump. Not sure if yours has this attachment but I do find it works better with it. These pumps work well but they are definitely not perfect. Sorry I couldn’t help you more!

      • Igor Goni says:

        Sorry typo there. A Jobe pump. Was also able to inflate my bl12’6″ board to 18psi in less than 10mins

    • Igor Gobi says:

      Hey Tammy just bought a Jone pump. Had the same issie amd solved it by replacing the ring that goes on the board size. Your pump must have come with a replaceable ring. This fixed the issue for me immediately

    • Steve Martin says:

      iRocker came out with a new hose that won’t pop off the electric pump. It’s more like the one on the hand pump, where the adapter and hose are one. They sent me one for free toward fall ’18. Try calling them…!

  26. I ordered a Bravo High Pressure 12 Volt Pump and a SUP valve attachment to use for my two inflatable paddleboards. It works great (so much better than hand pump, and quickly inflates to the PSI we need), but every time I use it there is some air that escapes as the PSI gets higher (I was thinking of maybe using some electrical tape to help with this?), but when I detach the pump at the desired PSI, air shoots out of the paddleboard causing me to have to re-inflate. Do you have any suggestions for me on how to fix this? I don’t know why it is deflating when I take off the pump – I’m not pressing the button down!

    • Hi Lisa, Before you start inflating do you press the SUP valve tip in and twist so that it is in the ‘popped up’ position? If the valve is popped up no air should escape when you detach the pump. If the valve is in the ‘up’ position and it is still doing that then I would think you have a valve issue and need to contact the manufacturer. I do have to hold the pump valve attachment tightly to the SUP valve sometimes with certain electric pumps so that it stays attached while inflating however even if it pops off no air should escape the board if the SUP valve is ‘up’. Hope that makes sense. Also do you have the same issue with the hand pump or just when using the electric pump?

    • Jon E Paulson says:

      Yes, close your valve. If it’s open once you detach the hose you will lose about 5-7 pounds of air.

  27. Drew Garner says:

    Do any of these pumps come with Standard 2 or 3 prong wall plug and car adapters or just jumper cable?

    I am health and PE teacher and we have 5 inflatable SUP for swim and PE classes… So we don’t have access to a car battery in the pool area.

    AC for Pool and car adapter when I use them outside of the school

    • Hi Drew, I love that you have inflatable SUP’s as part of your swim and PE classes! Unfortunately these electric pumps don’t come with a wall plug or car adapters. You would need to get a pump with a battery pack to be able to use it away from a vehicle. It costs more to get the battery pack but they work great and you can recharge the battery pack by plugging it into the wall before use.

      • Can you direct me as to what to look for to serve as a battery pack for the Bravo BP12 Single-Stage Electric Pump? I don’t really like the idea of having to pop my hood and connect directly to my car battery, but I’m having trouble understanding or finding what I’m supposed to get… Thanks.

        • This is the battery you would need at Amazon.com. Unfortunately it doesn’t seem to be in stock but you might be able to find it elsewhere. It’s not cheap, it will likely cost as much as the pump did but it is definitely handy to have. If you haven’t already bought the pump you might be able to find a package deal. I did a little searching and for some reason I don’t see many out there at all. I think the company has been working on improving the pump so maybe the new battery packs haven’t hit the market yet. If all else fails try contacting Bravo Pumps. Good luck!!

          • I just got the Bravo 2-stage and the battery Allison mentions. The first time I used the battery, the pump stuttered and then cut out at about 12 psi (after about three minutes). An hour or two later I tried again and this time the pump cut out at 7 psi (after a minute or two). I still need to test hooking the pump up to the car battery… – but is it possible the battery from Amazon is bad? There’s a green light on the charger and that supposedly indicates the battery IS charged. I didn’t charge it at all – it was green out of the box.

          • Hi Amy, I’d give it a full charge and then see what happens. Sounds like it didn’t have much of a charge left. If it still does that after fully charging it then I’d definitely return it. It should be able to inflate multiple boards on one charge.

          • THANK YOU, ALLISON! So – I thought the battery was already charged when I got it since when I plugged it into the charger, the light was green. But yesterday I decided to leave it plugged in anyway – and when I checked on it a minute or two later, the light was red! I guess it takes a minute for the charger to “register” whether the battery is charged or not. Anyway, it took nine hours to charge it. I’ve just tested and after six minutes my board was done. Alas, it all gets put away now since I live in upstate NY… Can’t wait for my trip to Florida in early spring! 🙂

          • So happy to hear that!! Florida in the Spring sounds like a nice trip to look forward to, happy paddling!

    • You can get a Cigarette Lighter Socket to Wall Plug Power Adapter. Just search Amazon or Google. There are several different types, just make sure you get one for the appropriate electrical load. Here is an example:
      https://www.amazon.com/AC-Converter-Cigarette-Vacuum%EF%BC%8CCar-Refrigerator/dp/B07K871KM9/ref=mp_s_a_1_4?keywords=cigarette+to+wall&qid=1550804999&s=gateway&sr=8-4

      • William Salopek says:

        A car cigarette lighter can produce about 180 watts (that said, I’m not sure how much SUP air pumps actually need, but it’s probably close to the max the cigarette lighter can supply)…at 12 volts, that means you’d want a 15 amp adapter (volts times amps = watts). Meaning…you want to get as close to a 15 amp AC to DC adapter as possible. The link above shows a (now discontinued) 6 amp model. That MIGHT very well be enough, but I see 10-amp models for $20-ish dollars, so I’d definitely go for those higher amps. Remember also that buying an adapter with, say, 15 amps, when the pump, say, only requires 10, does NOT mean the pump will burn out or some such thing, as the pump will only PULL what it wants from the adapter…the adapter does not PUSH electricity, it just SUPPLIES it to whatever is asking for it, up to it’s max rating.

  28. Niki Acosta says:

    Following this thread!

    Just bought two Red Paddle Explorer 13’2s. They’re awesome… they’ve replaced the Lahui Kai racing boards and the SUP ATX Sierra with the displacement hull as our favorites. But pumping… whoa. Texas heat and pumping (even with the awesome dual chamber Titan pump) give me quite the workout before I hit the water.
    Speaking of – do any of your find you lose pressure on your inflatable SUPs? Just got two Red Paddle Explorers– maybe it’s because they’re new or something, but one lost about 3 PSI overnight and the other lost 7. I’m doing as Red Paddle suggests – storing at 15 PSI or less. Hoping it’s because they’re new.

    Thanks for the great review!

    • Allison says:

      Hey NIki, Yes I can totally relate to pumping the boards in the heat… Although I am sure it is not nearly as hot here as in Texas! The Red 13’2″ Explorer ISUP’s are awesome, great choice! To tell you the truth I usually deflate my boards after each use. The odd time I have left them inflated over night I do normally have to add a little air pressure before hitting the water again. However losing 7 psi overnight seems like a lot. Keep an eye on it and if it keeps happening I would contact Red Paddle Co sooner than later and see what they say. Good luck!

    • Keep in mind that temperature will affect your pressure quite a bit. If you pump up your board in the heat and then put it in cool water, or if you store it in your air conditioned house, that’s going to make a difference in what pressure you’re getting. I’d say it’s completely likely to be a difference of 3psi… 7 seems like a stretch. But losing that much air in one night, you’d definitely see the bubbles from the leak in the water if you look…

  29. Allison – I have the Isle Explorer 11″ and am thinking about getting one of the Bravo pumps. Can you tell me if the 2 stage pump is faster than the single stage and if so how much faster? It seems like it should do a quicker and better job at getting the high pressure. Some of the reviews of the single stage on Amazon say they have to use the hand pump to get the last few psi. I’m trying to figure out if the extra $60 is worth it. Thanks

    • I have both… I don’t actually find the dual stage electric pump much faster at all than the single stage to be honest. I prefer the dual stage only because I can see the progress on the PSI dial. However they both have problems at reaching the last couple PSI. That being said I use them all the time and if it inflates my board to only 13 or 14 PSI it is totally fine, it is always rigid enough. I have been told that there is going to be an upgraded version of this pump coming out eventually that addresses this issue, although I have yet to see it and have no idea when it will be on the market. I would suggest go for the single stage for now and maybe upgrade down the road if the ‘new and improved’ pump ever arrives.

  30. Jamie McVicar says:

    I have the Bravo BP 12. Burnt out the piston twice before the distributor apparently fixed it. These are not robust pieces of equipment. Make sure to rest it before filling a second board. Also, I don’t trust any of the gauges on manual or electric pumps. I have a separate expensive gauge that shows all other pumps consistently overmeasure pressure. When they say it’s 15 psi it’s only 12-13. Food for thought.

  31. Tim Moss says:

    It appears the Black and Decker has no high volume pump guage and there is no indication of maximum pressure on that function. Probably woudl have to fix an in-line manometer.

    The 2 stage is great but I find it auto cuts off well shy of maximum pressure – Im getting 12 psi as measured by other manometers. I have fettled/hacked it though so it is giving 15psi now. Let me know if you would like to know how I did it!

    • Hey Tim, I’m having similar issues with my board. When I set my pump to 14 or 15 psi, it manually shuts off around 11/12 psi thinking it has reached the correct inflation.

      You mind passing along how you were able to get around this?

      Thanks!

  32. Antonello says:

    Hi gays, anyone has tried the black & decker ASI500?

    • Allison says:

      Haven’t tried it. It doesn’t look like it has the right valve attachment for an inflatable SUP but possibly one could be added on separately.

  33. Do you know if all the aforementioned pump models will work with Aqua Marina? I just bought an enormous Aqua Marina Super Trip SUP (needed the extra stability since I’ll be towing my two kids <5 onboard) — and I'm dreading using the hand pump to fill this bubba. I've seen two offerings by Aqua Marina- 1- the "SUPER PUMP" http://www.aquamarina.com/h-pd-50-0_312.html?keyword=super it looks alot like the above #3 airhead— do you think its the same thing- just with a different label? The second option I found was on amazon 2- http://www.amazon.com/Electric-Inflatable-Paddle-Board-Kayak/dp/B00YYV2RCK/ref=sr_1_38?srs=8110903011&ie=UTF8&qid=1459382052&sr=8-38 I've seen this model with and without the cig charger. I would DEF need the cig charger, or a battery pack– as the 12V hood lift charge would be burdensome enough without little ones running about. Perhaps most concerning though, is the valve fitting — Searching amazon i came across several posters you stating the valve fitting was not appropriate for their Aqua Marina SUPS—- They said they inflate using the electric pump holding the fitting in place. Geez- If that's the case, I might as well use the hand pump. Any advice would be greatly appreciated

    • I don’t have much experience with the Aqua Marina boards so I am not 100% sure of their valve fitting. I am fairly sure the ‘super pump’ they offer is the same as the Airhead one. I have seen this one used by several different companies, just the colour and logo change. It works well but is a little slower than other electric pumps I have tried. I’m not sure about the second link you mentioned. It is one of my great frustrations that although most inflatable SUP’s use the same type of valve they seem to vary in size and consequently many of them need a different valve attachment to fit. I would suggest going with the electric pump they offer to be on the safe side. I have had to hold the fitting in place while using my electric pump on certain boards and it is NOT fun. Go with one that you know fits for sure. Sorry I couldn’t help you more, good luck!

    • Michael says:

      I’m in the same boat. I’d like to get the pump for my aqua marina monster but I’m not sure if the valve is compatible. Any updates on this?

      Thanks

  34. Hi Allison, thanks for the review. I just couldn’t bring myself to spend the money on the two stage, and was hoping you’d have a review on the new single stage pump. Sounds like it’s more than adequate for the needlenose SUP, and more affordable. I think I’ll pick one up soon.

  35. Jessica Harlan says:

    I have a Sea Eagle Longboard and my husband bought me that Bravo 2-stage pump. It frustrates me that they do not include an adaptor to connect the pump with the valve! Instead, it comes with a set of adaptors, and when I called to ask for help setting it up, the guy on the phone had some crazy jerry-rigging instructions that involved scuffing up the adaptor so that it will not slip out of the valve. When I reach a certain level of PSI it often pops out, and sometimes I’ve gotten the adaptor stuck in my valve.

    Have you found an adaptor that has the little pegs that fit into the valve, similar to the hand-pump hose?

    • I agree a specific SUP valve adapter would be nice. I actually thought I might write to the Bravo company and suggest it. However I don’t have much trouble with the little white plastic adapters that are included. There’s one that fits the valve of the Longboard quite well. I do have to hold the hose by the valve the whole time it’s inflating instead of just securing it and leaving it and I’ve had the adapter get stuck before too… I am extra careful to make sure I pull the adapter out and not just the hose when inflation stops. It’s not perfect but it’s still the best I’ve tried so far and ultimately it still works fairly well. I tried once securing my own valve adapter to the hose but it didn’t fit the hose properly. What did work was attaching the electric pump hose to the hose of my manual pump that had the proper valve… makes for an extra long hose. Works really well but makes inflation slower so I usually don’t bother with that. I will definitely let you know if I find or figure out a more convenient option.

Leave a Reply to Eric Cancel reply

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.